filter your search allcollegesexamnews

TANCET 2017 ELIGIBILITY

STATE LEVEL ONLINE TEST

TANCET 2017 Eligibility Criteria

TANCET 2017 is conducted to provide admissions to the aspiring candidates in the post graduate programmes such as M.Tech. /M.E. /M.Plan/ M.Arch. /MBA/MCA. It will be conducted by the Anna University on March 25, 2017 and March 26, 2017. The TANCET 2017 Application Form is available on the official website till February 20, 2017. The candidates must carefully go through the TANCET 2017 Eligibility Criteria before proceeding towards the application process. The TANCET 2017 Eligibility Criteria varies for various categories. There is no age limit mentioned under eligibility criteria of TANCET 2017 entrance examination. Adult candidates of any age can apply.


TANCET Qualifying Examination Criteria

The candidates applying for the post graduate programmes in TANCET 2017 must consider the Minimum Qualifying Marks required to satisfy the TANCET 2017 Eligibility Criteria. The following are the minimum marks requirement for various courses under TANCET 2017:

For MBA :

Applicant should be a pass out from a recognized university with a bachelor degree and should have attained minimum 50 % (45% for reserved category students) in qualifying degree examination.

  1. 10+ 2+3 years pattern

Or

  1. 10+3 years diploma + 3 years pattern

Or

(i)B.E/B.Tech./B.Arch./B.Pharm

Or

(ii) 10+2+ Associate Member of Institution of Engineers (AMIE)

Or

(iii) 10+3 years diploma (awarded by the state board of technical education) + AMIE.*

For MCA:

Candidate should hold a bachelor’s degree with minimum 3 years duration in BCA, B.Sc. (computer Science / information technology) with mathematics in 10+2 or at graduate level and should attain minimum 50% and 45% for reserved category in qualifying degree examination.

  1. 10+2+3/4 years pattern

Or

  1. 10+3 years diploma + 3 years pattern

Or

  1. (i) 10+2+ AMIE*

Or

(ii) 10+3 years diploma (awarded by the state board of technical education) + AIME*

M.E./M.Tech./M.Arch./M.Plan.

  1. Applicant should be a pass out from a recognized university with a bachelor degree and should have attained minimum 50 % (45% for reserved category students) in qualifying degree examination.
  1. B.E/B.Tech./B.Arch.

Or

  1. B.Pharm./ B.Sc. (Agri. / Forestry / Horticulture /Fishery) degree programme.

Or

  1. Master’s Degree in the relevant branch of Science / Arts, which are prescribed.

Or

  1. M.Sc. (5 years) integrated

Or

  1. B.Sc. 3 years (computer Science / Information technology) and M.Sc. 2 years (computer science/ Information Technology)
  2. M.Sc. (3 years) after 10+2+3 year’s bachelor’s degree.
  3.  MCA Lateral Entry (2 years) after 10+2+3 years degree in BCA or B.Sc. (Computer Science / information Technology)
  1. i. 10+2+ AMIE*
  1. 10+3 years diploma (awarded by the state Board of Technical Education ) + AMIE*

*Note:

AMIE (Associate Member of Institution of Engineers) is an engineering degree from a distance education mode which is equivalent to engineering degree. Candidates with section ‘A’ & ‘B’ certificates (AMIE) and other similar certificate of professional bodies or societies recognized by the Ministry of Human Resource Development, Govt. of India and enrolled before 31.05.2013 are considered to be equivalent to B.E. / B.Tech. Degree holders only with 2 years regular full time Teaching / Industrial experience in the relevant field after successful completion of the course including project work. An experience certificate is to be produced by the candidates.

  • Candidates appearing for the final semester/ year of examination of the said qualifying degree course except courses offered by professional Institutions (like AMIE) during April/May 2017 may also apply for TANCET 2017.
  • Acceptance of a person as a candidate for writing the entrance test does not confer on the person, the right of equivalent eligibility for admission to a course entirely rests with the admitting authority offering the courses.
  • Candidate with degree obtained without studying 10th, 12th Std. or 3 years degree programme is not eligible.

Note:

  • Candidate with valid GATE score card in engineering/ technology discipline or is also eligible for TANCA 2017.
  • Candidate with valid GATE score card in Engineering Science (XE) and Life Science (XL) papers along with TANCET 2016 score.

Eligibility Qualification for admission to various M.E./M.Tech./M.Arch./M.Plan. Degree programmes

The TANCET 2017 Eligibility Criteria requires minimum qualification for admissions in various courses. The table below mentions the eligible qualification for various courses:

FACULTY OF CIVIL ENGENEERING
S.NO.P.G ProgrammesEligible Qualification
1.M.E. Construction EngineeringB.E. / B.Tech. 1. Civil Engineering 2. Civil and Structural Engineering
2.M.E. Construction Management
3.M.E. Construction Engineering and Management
4.M.E. Computer Methods and Application in Structural engineering
5.M.Tech. Geo-Technical Engineering
6.M.E. Infrastructure Engineering
7.M.E. Infrastructure engineering and Management
8.M.E. Structural Engineering
9.M.. Structural Engineering and Construction
10.M.E. Soil Mechanics and Foundation Engineering
11.M.E. Transportation Engineering
12.M.Tech. Coastal ManagementB.E./B.Tech. 1.Civil Engineering 2.marine Engineering 3.Geo-informatics Engineering 4. Agricultural and irrigation Engineering
13.M.E. Environmental EngineeringB.E./B.Tech 1. Civil Engineering 2. Agricultural and irrigation Engineering 3. Environmental Engineering 4. Chemical Engineering 5. Geo- informatics Engineering 6. B.Tech. (Energy and Environmental engineering) of Tamil Nadu Agricultural University, Coimbatore. (or) B.E./B.Tech 7. Mechanical Engineering (sponsored candidates from Government organizations) 8. Electrical Engineering (with 3 years of relevant experience) (sponsored candidates from government organization)
14.M.E. Environmental ManagementB.E. / B.Tech. 1. Civil Engineering 2. Chemical Engineering 3. Geo-informatics Engineering 4. Environmental Engineering 5. B.E./B.Tech. (Other branches) with 3 years’ experience in the field of Environment Management/ Environmental Engg. 6. B.tech. (energy and Environmental Engineering) of Tamil Nadu Agricultural university, Coimbatore
15.M.E. Environmental Engineering and ManagementB.E. / B.Tech. 1.Civil Engineering 2. Agricultural and Irrigation Engineering 3. Bio-Technology 4. Industrial Bio- Technology 5. Chemical and Electrochemical Engineering. 6. Geo-informatics Engineering 7. Chemical Engineering 8. Mechanical Engineering with 3 years’ experience in the field of Environmental Management/ Environmental Engineering 9. Electrical and Electronics Engineering with 3 years’ experience in the field of Environmental Management/ Environmental Engineering
16.M.E. Hydrology and Water Resources EngineeringB.E. / B.Tech. 1.Civil Engineering 2. Agricultural Engineering 3. Agricultural and Irrigation Engineering
17.M.E. Irrigation. Water Management
18.M.Tech. Remote Sensing
19.M.E. Integrated Water Resources ManagementB.E. / B.Tech. 1.Civil Engineering 2. Geo-informatics Engineering 3. Agricultural Engineering 4.Agriculatural and Irrigation Engineering 5. B.Tech. (Energy and Environmental, Engineering) of Tamil Nadu Agricultural University, Coimbatore.
20.M.E. Remote Sensing and GeomaticsB.E. / B.Tech. 1.Civil Engineering 2. Geoinformatics 3. Agricultural and irrigation Engineering
Faculty of Mechanical Engineering
SI. No.P.G. ProgrammesEligible Qualification
1.M.E. Aeronautical EngineeringB.E. / B.Tech. 1. Aeronautical Engg. 2. Mechanical Engg. 3. Aerospace Tech. 4. Civil Engg. 5. Mechatronics
2.M.E. Aerospace TechnologyB.E. / B.Tech. 1. Mechanical Engg. 2. Aeronautical Engg. 3. Mechatronics. 4. Aerospace Tech.
3.M.Tech. Aviation TechnologyB.E./B.Tech. 1. Mechanical Engg. 2. Aeronautical Engg. 3. Production Tech. / Engg. 4. Aerospace Tech. 5. Electronics and Communication Engg. 6. Mechatronics 7. Industrial Engg. 8. Manufacturing Engg.
4.M.E. Automobile EngineeringB.E. /B.Tech. 1. Automobile Engg. 2. Mechanical Engg. 3. Production Engg. /Tech. 4. Manufacturing Engg. 5. Mechatronics
5.M.E. Automotive EngineeringB.E. / B.Tech. 1. Mechanical Engg. 2. Production Engg. /Tech. 3. Automobile Engg. 4. Electronics and communication Engg. 5. Manufacturing Engg. /Tech. 6. Mechatronics 7. Electrical and electronics Engg.
6.M.E. Advanced Manufacturing TechnologyB.E./B.Tech. 1. Mechanical Engg. 2. Production Engg. /Tech. 3. Automobile Engg. 4. Manufacturing Engg. /Tech. 5. Mining Engg. 6. Industrial Engg. 7. Metallurgy 8. Material Science and Engg. 9.Computer Integrated Manufacturing
7.M.E. Cryogenic EngineeringB.E./B.Tech. 1. Mechanical Engg. 2. Aeronautical Engg. 3. Production Engg. /Tech. 4. Marine Engg. 5. Automobile Engg. 6. Mechanical and Automation Engg.
8. 9.M.E. Computer Integrated Manufacturing M.E. Computer Aided DesignB.E./B.Tech. 1. Mechanical Engg. 2. Automobile Engg. 3. Production Engg. /Tech. 4. Manufacturing Engg. /Tech. 5.Computer Integrated Manufacturing 6.Metallurgy 7. Industrial Engg. 8.Mechatronics 9. Material Science and Engg. B.E./ B.Tech 1. Mechanical Engg. 2. Automobile Engg. 3. Manufacturing Engg. /Tech. 4. Production Engg. /Tech. 5. Aerospace Tech. 6.Industrial Engg 7. Marine Engg. 8.Mechatronics 9. Aeronautical Engg. 10. Aerospace Engg.
10.M.E. CAD/CAM
11.M.E. Engineering DesignB.E./B.Tech. 1. Mechanical Engg. 2. Automobile Engg. 3. Production Engg. /Tech. 4. Manufacturing Engg. /Tech. 5. Industrial Engg. 6.Mechtronics 7. Marine Engg. 8. Aeronautical Engg.
12.M.E. Energy EngineeringB.E./B.Tech. 1. Mechanical Engg. 2. Automobile Engg. 3. Production Engg. /Tech. 4. Manufacturing Engg. /Tech. 5. Industrial Engg. 6.Mechatronics 7. Marine Engg. 8. Aeronautical Engg.
13.M.E. Heat Power EngineeringB.E./B.Tech. 1. Mechanical Engg. 2. Automobile Engg. 3.Production Engg./Tech.
14.M.E. Industrial Automation and RoboticsB.E./B.Tech. 1. Automobile Engg. 2. Mechanical Engg. 3. Manufacturing Engg. /Tech. 4.Mechatronics 5. Production Engg. /Tech. 6. Aeronautical Engg. 7. Metallurgical Engg. 8. Material Science and Engg.
15.M.E. Robotics
16.M.E. Industrial EngineeringB.E./B.Tech. 1. Industrial Engg. 2. Mechanical Engg. 3.Manufacturing Engg./Tech 4. Production Engg. /Tech. 5. Production Engg. /Tech. 6. Printing Tech. 7. Aeronautical Engg. 8. Automobile Engg. 9. Metallurgical Engg. 10. Mechatronics 11. Material Science and Engg.
17.M.E. Industrial Safety EngineeringB.E./B.Tech. (all branches)
18.M.E. Industrial MetallurgyB.E./ B.Tech 1. Mechanical Engg. 2. Production Engg. /Tech. 3. Automobile Engg. 4. Manufacturing Engg. /Tech. 5. Metallurgy 6. Material Science and Engg.
19.M.E. internal Combustion EngineeringB.E./B.Tech. 1. Mechanical Engg. 2. Automobile Engg. 3. Mechatronics 4. Marine Engg.
20.M.E. Lean ManufacturingB.E. / B.Tech. 1. Mechanical Engg. 2. Production Engg. /Tech. 3. Automobile Engg. 4. Aerospace Tech. 5. Industrial Engg. 6. Manufacturing Engg. /Tech. 7. Aeronautical Engg.
21.M.E. MechatronicsB.E./B.Tech. 1. Mechanical Engg. 2. Automobile Engg. 3. Production Engg. /Tech. 4. Electronics Engg. 5. Aerospace Tech. 6. Computer Science & Engg. 7. Electrical and Electronics Engg. 8. Instrumentation and Control Engg. 9. Electronics and Instrumentation Engg. 10. Electronics and Communication Engg. 11.Mechatronics 12. Manufacturing Engg. /Tech. 13. Instrumentation Engg. 14. Aeronautical Engg.
22.M.E Manufacturing EngineeringB.E./B.Tech. 1. Production Engg. /Tech. 2. Automobile Engg. 3. Mechanical Engg. 4. Industrial Engg. 5. Metallurgy 6. Manufacturing Engg. /Tech. 7.Mechatronics 8. Material Science and Engg. 9. Rubber and Plastics tech. 10. Polymer Engg/Tech.
23.M.E. Manufacturing Engineering (with specialization in green Manufacturing)B.E./B.Tech. 1. Aeronautical Engg. 2. Automobile Engg. 3. Civil Engg. 4. Mechanical Engg. 5. Industrial Engg. 6. Electrical and Electronics Engg. 7. Chemical Engg. 8. Rubber and Plastic Tech. 9. Production Engg. /Tech. 10. Manufacturing Engg. /Tech. 11. Computer Science and Engg. 12. Information Technology 13. Electronics and Instrumental Engg. 14. Electronics and Communication Engg.
24.M.E. Manufacturing System ManagementB.E. / B.Tech. 1. Mechanical Engg. 2. Manufacturing Engg. /Tech. 3. Industrial Engg. 4. Printing Tech. 5. Automobile Engg. 6. Production Engg./t Tech 7. Mechatronics 8. Mining Engg. 10. Material Science and Engg.
25.M.E. Product Design and DevelopmentB.E. / B.Tech. 1. Mechanical Engg. 2. Automobile Engg. 3. Manufacturing Engg. /Tech. 4. Production Engg./Tech 5. Industrial Engg. 6. Mechatronics
26.M.E. Product Design and CommerceB.E./B.Tech. 1. Mechanical Engg. 2. Production Engg. /Tech. 3. Automobile Engg. 4. Manufacturing Engg. /Tech. 5. Industrial Engg. 6. Mechatronics
27.M.E. printing and packaging technologyB.E./B.tech. 1. Printing Tech. 2. Mechanical Engg. 3. Manufacturing Engg./Tech 4. Production Engg. /Tech. 5. Chemical Engg./Tech 6. Chemical and electrochemical Engg. 7. Polymer Engg. /Tech. 8. Plastic Tech. 9. Rubber and Plastic Tech. 10. Polymer Science and Engg. 11. Packaging Tech. 12. Printing and Media communication 14. Printing and packaging Tech.
28.M.tech. Quality EngineeringB.E./ B.tech (All branches)
29.M.E. Quality Engineering and ManagementB.E./B.Tech (All branches ) with minimum 2 years’ experience
30.M.E. Thermal Engineering (with Specialization in Refrigeration and Air- Conditioning)B.E./B.Tech 1. Mechanical Engg. 2. Automobile Engg. 3. Marine Engg.
31.M.Tech. Renewable EnergyB.E./B.Tech. 1. Bio-Technology 2. Chemical Engg. 3. Industrial Bio-Technology 4. Electrochemical Engg. 5. Mechanical Engg. 6. Chemical & Electrochemical Engg. 7. Automobile Engg, 8. Manufacturing Engg. /Tech. 9. Production Engg. /Tech. 10. Industrial Engg.
32.M.E. Solar EnergyB.E. / B.Tech. 1. Mechanical Engg. 2. Energy Engg. 3. Energy and Environmental Engg. 4. Mechanical and Energy Engg. 5. Electrical and Electronics Engg.
33.M.E. Thermal EngineeringB.E. / B.Tech. 1. Mechanical Engg. 2. Production Engg. /Tech. 3. Automobile Engg. 4. Aeronautical Engg. 5. Aerospace Tech. 6.Mechatronics 7. Marine Engg. 8. Industrial Engg. 9. Manufacturing Engg./Tech.
34.M.E. Virtual Prototyping and Digital ManufacturingB.E./B.Tech. 1. Civil Engg. 2. Mechanical Engg. 3. Production Engg./Tech 4. Automobile Engg. 5. Manufacturing Engg. /Tech 6. Industrial Engg. 7. Mechatronics 8. Computer Science and Engg. 9. Robotics & Automation
35.M.E. Welding TechnologyB.E./B.Tech. 1. Mechanical Engg. 2. Production Engg. /Tech. 3. Automobile Engg. 4.Metallurgy 5. Aeronautical Engg. 6. Aerospace tech. 7. Mechatronics 8. Marine Engg. 9. Industrial Engg. 10. Manufacturing Engg. /Tech. 11. Material Science and Engg.
FACULTY OF ELECTRICAL ENGINEERING
SI. NOP.G. ProgramsEligible Qualifications
1.M.E. Control SystemB.E. / B.Tech. 1. Electrical and Electronics Engg. 2. Electronics and Communication Engg. 3. Electronics and Instrumentation Engg. 4. Instrumentation and Control Engg. 5. Instrumentation Engg. 6. Electronics Engg.
2.M.E. Control and Instrumentation Engineering
3.M.E. Electrical Drives and Embedded Controls
4.M.E. Power Electronics and Drives
5.M.E. Electrical MachinesB.E. / B.Tech. 1. Electrical and Electronics Engg.
6.M.E. High Voltage Engineering
7.M.E. Power Systems Engineering
8.M.E. Power Systems and Drives
9.M.E. Power Engineering and Management
10.M.E. Embedded System TechnologiesB.E. / B.Tech. 1. Electrical and Electronics Engg. 2. Electronics and Communication Engg. 3. Computer Science and Engg. 4. Instrumentation and Control Engg. 5. Electronics and Instrumentation Engg. 6. Information Technology 7. Electronics Engg. 8. Instrumentation Engg. 9. Software Engg.
11.M.E. Embedded and Real Time System
12.M.E. Instrumentation EngineeringB.E. / B.Tech. 1. Instrumentation Engg. 2. Electrical and Electronics Engg. 3. Electronics and Instrumentation Engg. 4. Instrumentation and Control Engg.
FACULTY OF TECHNOLOGY
SI. NO.P.G. ProgrammesEligible Qualifications
1.M.Tech. Apparel Technology ManagementB.E. / B.Tech 1. Textile Engg. / Tech. 2. Textile Chemistry 3. Fashion Tech. 4. Leather Tech. 5. Apparel Tech.
2.M.Tech. Bio-TechnologyB.E. / B.Tech. 1. Chemical Engg. 2. Leather Tech. 3. Genetic Engg. / Tech. 4. Bio-Chemical Engg. / Tech. 5. Industrial Bio- Technology 6. Petroleum Engg. / Tech. 7. Bio- Technology 8. Petrochemicals Engg. /Tech. 9.Agricultural Bio- Technology 10. Petroleum Refining & Petro Chemicals Engg. 11. Chemical and Electrochemical Engg. 12. Bio- Chemistry 13. Micro- Biology 14. Bio- Physics 15. Bio- Technology 16. Genetics 17. Pharm.
3.M.Tech. Bio- Pharmaceutical TechnologyB.E. / B.Tech. 1. Chemical Engg. 2. Bio- Technology 3. Industrial Bio- Technology 4. Biomedical Engg. 5. Bio Engineering 6. Pharmaceutical Engg. /Tech. 7. Biochemical Engg. / Tech. 8. Biopharmaceutical Engg. / Tech. M.Sc. 9. Biochemistry 10.Microbiology 11. Genetic Engineering 12. Bio Technology 13. Genetics and Molecular Biology 14. B.Pharm
4.M.Tech. Chemical EngineeringB.E. / B. Tech 1. Chemical Engg. 2. Electro- Chemical Engg. 3. Pharmaceutical Engg. / Tech. 4. Petroleum Engg./ Tech 5. Food Technology 6. Food Processing Engg. /Tech. 7. Petrochemicals Engg. /Tech. 8. Petroleum Refining & Petrochemicals Engg. 9. Chemical and Electrochemical Engg.
5.M. Tech. Ceramic TechnologyB.E./B.Tech. 1. Chemical Engg. 2. Ceramic Engg. / Tech. 3. Metallurgy 4. Petrochemicals Engg. / Tech. 5. Petrochemicals Engg. / Tech. 6. Petroleum Refining & Petro chemicals Engg. 7. Ceramic & Cement Technology 8. Chemical and electrochemical Engg. 9. Material Science and Engg. 10. Mechanical Engg M.Sc. 11.Physics 12. Applied Physics 13. Chemistry 14. Applied Chemistry 15. Material Science
6.M.Tech. Environmental Science and TechnologyB.E. /B.Tech 1. Chemical Engg. 2. Industrial Bio- Technology 3. Bio-Technology 4. Petroleum Engg. / Tech. 5. Petrochemicals Engg. /Tech. 6. Chemical & Electro Chemical Engg. 7. Petroleum Refining & Petro Chemicals Engg. 8. B.Tech. (Energy and Environmental Engineering of Tamil Nadu Agricultural University, Coimbatore.
7.M.Tech. Electro-Chemical EngineeringB.E./B.Tech 1. Chemical Engg. 2. Chemical and Electrochemical Engg. 3. Petroleum Engg. / Tech. 4. Petrochemicals Engg. /Tech.

Categories for admission in M.E/M.Tech/M.Plan/M.Arch

The candidates who wish to get admission in M.E./M.Tech/M.Plan/M.Arch will be divided into 3 groups and admission will be granted accordingly:- 

  • GATE Category-  Candidates who have a valid score in GATE 2016 or 2017 with qualifying score for assistantship in corresponding discipline falls under this category. Note that for paper code XE and XL candidates have to appear for TANCET also
  • Sponsored Category- A limited number of seats in TANCET 2017 is fixed for employees working in Government organisations, Government aided educational institutions and professional architects with a minimum 5 years of experience falls under this category.
  • TANCET Category- Candidates appearing for TANCET 2017 will fall under this category.

TANCETNews

SEE MORE NEWS
March 21, 2017TANCET 2017

Last Week Preparation Tips fo ..

Anna University will conduct TANCET 2017 on March ...

March 21, 2017TANCET 2017

Last Week Tips for TANCET 201 ..

TANCET 2017 is around the corner. Follow these las ...

March 17, 2017TANCET 2017

TANCET 2017 Admit Card Releas ..

TANCET Admit Card/Hall Ticket 2017 released at www ...

February 23, 2017TANCET 2017

TANCET 2017 Reservation Crite ..

TANCET 2017 Reservation Details. Selection shall b ...

Must See Articles

Feb 18,2017TANCET 2017

How to Apply for TANCET 2017?

TANCET 2017 Application Process has started from J ...

Comments

Comments


No Comments To Show

×