filter your search allcollegesexamnews

BPTPIA CET 2018

STATE LEVEL OFFLINE TEST

BPTPIA CET 2018

Bihar Private Technical & Professional Institutions Association (BPTPIA) will conduct the competitive entrance test (CET) for candidates seeking admission into under graduate (UG) Engineering/Technology Degree (B.Tech) and Diploma (Polytechnic) courses. It is likely to be scheduled in the month May/June 2018.

  • BPTPIA is held once a year, usually in the months of either May or June.
  • Application form for both B.Tech and Polytechnic programs needs to be submitted through offline mode
  • Application form can however be procured through online or offline mode (demand draft or cash)
  • Candidates need to fulfil the eligibility criteria specified by BPTPIA before applying
  • BPTPIA CET 2018 Admit card will be dispatched via post on the registered address of applicants.
  • Duration of BPTPIA CET 2018 will be two hours
  • The paper would be set from Physics, Chemistry and Mathematics
  • The result is expected to be declared within 10 days of the conduct of BPTPIA CET 2018

About BPTPIA CET 2018

  • B.Tech degree in one or more of above courses will be offered by 15 colleges
  • A total of 6100 seats are available across all colleges and courses for Engineering program
  • Polytechnic diploma in one or more of above courses will be offered by 24 colleges
  • A total of 5520 seats are available across all colleges and courses for Polytechnic program
  • The B.Tech program is offered in the following engineering disciplines:
  1. Civil Engineering
  2. Electrical & Electronic Engineering
  3. Mechanical Engineering
  4. Electronics and Communication Engineering
  5. Computer Science and Engineering
  6. Information Technology
  • The courses offered under Polytechnic program are listed below
  1. Civil Engineering
  2. Mechanical Engineering
  3. Electrical Engineering
  4. Electronics Engineering
  5. Computer Science and Engineering
  6. Electronics and Communication Engineering
  7. Automobile Engineering
  8. Electrical & Electronic Engineering
  9. Chemical Engineering

BPTPIA 2018 Highlights

Some major highlights of BPTPIA CET 2018 is mentioned below for the reference of candidates.

Date of ExamMay/June 2018
Conducting BodyBihar Private Technical & Professional Institutions Association
Mode of ExamOffline Mode
Duration of Exam120 minutes (2 hours)
Courses OfferedDegree and Diploma programs across various Engineering & Technology streams
Number of Seats11620

BPTPIA CET 2018 Exam Dates

Candidates looking forward to appear for BPTPIA CET 2018 can check the table to keep a track of important events pertaining to the exam. The entrance for both B.Tech and Polytechnic courses would be conducted on the same day. The entrance for polytechnic courses will start from 11 am to 1 pm while the entrance for undergraduate engineering admission is scheduled from 2 pm to 4 pm.

EventDate
Last Date of Application SubmissionMay/June 2018
Availability of Admit CardMay/June 2018
Date of ExaminationMay/June 2018
Declaration of ResultWithin 10 days of Examination

BPTPIA CET 2018 ELIGIBILITY

There are certain eligibility criteria guidelines that a candidate must fulfil before applying for BPTPIA CET 2018. Eligibility criteria for degree and diploma courses are different. Candidates can go through the detailed BPTPIA CET 2018 Eligibility Criteria mentioned below for both B.Tech and Polytechnic programs.

1. Eligibility Criteria for UG 4-year Engineering & Technology Degree Program

  1. Admission in First Year
  • Candidate must have cleared 10+2 examination, with Physics, Mathematics and Chemistry/Biotechnology/Biology/Technical Vocation as compulsory subjects
  • Candidate must secure a minimum of 45% marks in above mentioned qualifying examination. For candidates belonging to reserved category, the minimum qualifying marks in qualifying examination is relaxed to 40%.
  1. Lateral Entry Admission in Second Year
  • Candidate must have secured a minimum of 45% marks in an All India Council for Technical Education (AICTE) approved Diploma examination in appropriate Engineering/Technology branch. Minimum marks threshold for candidates from reserved category is 40%
  • Candidate must have secured a minimum of 45% marks in any B.Sc degree course from a recognized University and should have cleared 10+2 examination with Mathematics as compulsory subject. Minimum marks threshold for candidates from reserved category is 40%
  1. Candidates from B.Sc background should have passed Engineering Mechanics and Engineering Graphics/Engineering Drawing papers from first year, along with papers of second year
  2. Furthermore, candidates from B.Sc background will be given consideration after supernumerary seats in this category have been filled by candidates from Diploma background
  3. Candidates from both B.Sc and Diploma background will be eligible for admission into first year of Engineering & technology degree courses, in case lateral entry seats are exhausted. However, first year admission is subject to availability of seats

2. Eligibility Criteria for UG 3-year Engineering & Technology Diploma Program

  1. Admission in First Year
  • Candidate must have cleared 10th or Matriculation examination or any equivalent examination
  • Candidate need to secure a minimum of 35% in the qualifying examination
  1. Lateral Entry Admission in Second Year
  • Candidate must have cleared 10+2 vocational or ITI in a recognized academic stream
  • Candidate need to secure a minimum of 60% in the qualifying examination

3. Age Criteria: There is no minimum or maximum age threshold to appear for BPTPIA CET 2018


BPTPIA 2018 APPLICATION FORM

Candidates will have to submit application form for BPTPIA CET 2018 through offline mode only. However, application form can be obtained by both through online and offline mode. They have to download and take a printout of the same. No changes are permitted post submission of the form online. Steps to apply for BPTPIA CET 2018 are mentioned below.

Online Procurement of application Form

  • Visit the official website of BPTPIA.
  • Find the ‘Download Forms’ section on left side of homepage and click on ‘Download Engineering form’ to apply for degree courses or ‘Download Polytechnic form’ to appear for diploma courses
  • Download the selected application form and take printout of the same

Offline Procurement of Application Form

  • Candidates can obtain prospectus and application form for BPTPIA CET 2018 from BPTPIA Office or offices of all institutions participating in entrance exam
  • Candidate can either make cash payment of INR 100 to buy prospectus and application form or make a payment of INR 150 through demand draft payable at Patna, in favor of ‘Bihar Private Technical & Professional Institutions Association’, to receive the same by post.

Steps to fill BPTPIA CET 2018 Application Form

  1. Fill all details on application form – name of applicant and parents, address, contact details, gender, category, academic details, subject applied for, Declaration by candidate and parents
  2. Candidate needs to indicate choice of institutes in order of preference. 1 should be given to the most preferred institute, 2 should be given to next preference and so on
  3. Candidate also needs to number examination centers in order of preference.
  4. Candidate will then have to fill two identical copies of Admit Card
  5. One admit card is for office use while other is for candidate
  6. Candidate will have to stick 3 passport size photographs – one on application form and one each on the two admit cards
  7. Candidate must duly sign the application form and copies of admit card
  8. Candidate is required to get a demand draft of INR 100 issued in favor of ‘Bihar Private Technical & Professional Institutions Association’. Demand draft must be payable at Patna
  9. Candidate also need to carry following documents-
  1. Self-attested copies of academic certificates, mark sheets and pass certificates
  2. Self-attested copies of School Leaving Certificate/College Leaving Certificate and caste/category certificate (if applicable)
  3. Self-attested copy of birth certificate
  4. Photocopy of character certificate issued by head of institution last attended
  5. Two self-addressed envelopes duly stamped with INR 50 each. Size of envelope should be 30 x 25cm
  1. Application form, along with demand draft (in case of online form procurement) and aforementioned enclosures must be submitted to the BPTPIA.
  2.  All the requisite documents must be submitted on or before last date of submission

BPTPIA CET 2018 Application Fee

Application fee is same irrespective of category to which candidate belongs. In case candidate obtains prospectus and application form through offline mode, he/she needs to either pay INR 100 cash or INR 150 in form of demand draft if procuring documents through post.

Candidate can also choose to obtain application form through online mode, in which case he/she will have to submit a demand draft of INR 100, while submitting application form.


BPTPIA CET 2018 ADMIT CARD

BPTPIA CET 2018 Admit card will be sent by conducting authority through post one week prior to the schedule of exam. It is necessary to have admit card because no candidate will be allowed to enter examination hall without in possession of admit card.

  • Application form contains two identical admit cards – one of Office Copy and other is Student Copy
  • The student copy will be sent to candidate via post on the registered address
  • Admit card will be send through the self-addressed, duly stamped envelope submitted with application form
  • Conducting authority does not assume any responsibility for candidate not receiving admit card due to discrepancy in address mentioned on envelope
  • In case candidate does not receive admit card in time, he/she is required to visit BPTPIA’s office to enquire about the same
  • BPTPIA 2018 Admit card clearly specifies that candidate must only use ball point pen during exam
  • Admit card contains following information-
  • Roll no.
  • Center of Examination
  • Date of Examination
  • Time of Examination
  • Name of Candidate
  • Father’s Name of the candidate
  • Mark of Identification
  • Full Signature of the Candidate
  • Passport size photograph of candidate

BPTPIA 2018 EXAM CENTER

BPTPIA 2018 Exam Centers for Polytechnic and Engineering entrance examination will vary. BPTPIA CET 2018 Exam Centers for both programs will be located in the respective colleges offering the courses.

  • BPTPIA CET 2018 for Polytechnic programs will be held at all 24 participating institutes
  • Similarly, examination for Engineering programs will be held at all 15 participating institutes
  • All examination centers are within the state of Bihar
  • Examination center will be allotted after submission of application forms by candidates, in which they have to indicate examination centers in order of their preference
  • Allocation of center is done at the sole discretion of conducting authority (taking into account preferences of candidates)
  • However, center once allocated cannot be changed.
  • Candidate will have to appear for examination with admit card at the center mentioned on his/her admit card

BPTPIA 2018 Exam Pattern & Syllabus

BPTPIA CET 2018 Exam Pattern is not mentioned in detail in the official notification. However, the authority has specified the following details in the notification pertaining to notification.

  • BPTPIA CET 2018 will be conducted over a duration of 2 hours (120 minutes)
  • The exam will comprise of three sections Physics, Chemistry and Mathematics
  • It will be conducted only through pen and paper mode (offline)

BPTPIA CET 2018 Exam pattern highlights

Duration of Exam120 minutes (2 hours)
Number of Sections3 – Physics, Chemistry, Mathematics
Mode of ExaminationOffline

BPTPIA CET 2018 Syllabus

BPTPIA CET 2018 Syllabus is based on the 10+2 syllabus of Bihar State Education Board. Candidate are advised to carefully go through all the topics of the three sections. Some of the major topics from each subject is compiled below for reference of the candidates.

ChemistryPhysicsMathematics
General Organic ChemistryElectrostaticsSets, Relations and Functions
Alcohol Phenol EtherThermodynamics Complex Numbers and Quardatic Equations
Redox reactionsWave Motion Matrices and Determinants
Chemical BondingRotational Motion Permutations and Combinations
Coordination CompoundLaws of Motion Mathematical Induction
P--block elementsRay Optics Binomial Theorem and its simple applications
S-block elementsMagnetic effect of current and Magnetism Sequences and Series
Aldehyde & KetonesSimple Harmonic Motion Limit, Continuity and Differentiability
SolutionsWave optics Integral Calculus
Solid StateUnits Dimension Errors Differential Equations
Chemical ThermodynamicsWork Energy Power Co-Ordinate Geometry
Ionic EquilibriumModern Physics Three Dimensional Geometry
Chemical EquilibriumCurrent Electricity Vector Algebra
Surface chemistryElectromagnetic Induction Statistics and Probability
Atomic StructurePhysics of Nucleus Trigonometry – 02
Gaseous StateFluids Mathematical Reasoning
Transition ElementsGravitation--
PolymersElasticity--
Nuclear ChemistrySolids and Semiconductor Devices--
Chemical KineticsCenter of Mass, Impulse and Momentum--
Mole ConceptsKinetic Theory of Gases--
Amines and Diazonium SaltsRadioactivity--
BiomoleculesAlternating Current--
Alkanes, Alkenes & AlkynesEM waves--
Electrochemistry----

BPTPIA CET 2018 RESULT

BPTPIA CET 2018 Result will be announced by conducting authority within 10 days of the conduct of examination. BPTPIA will publish the result on its official website, from where it can be downloaded by students.

  • Result will be declared both in form of rank list and scorecard
  • Students will be called for counselling solely on the basis of their performance in the entrance test.

Steps to download/view the scorecard

Candidates can use the following steps to view and download the scorecard/rank list-

  • Visit the official website of BPTPIA
  • Click on ‘Result’ tab on top row
  • Under Engineering tab, select ‘Result of Engineering 2018’ or under Polytechnic tab, select ‘Result of Polytechnic 2018’
  • BPTPIA Result list will open
  • Download the result
  • Result List contains following information –
  • Rank of Candidate
  • Code
  • Roll No.
  • Marks secured

BPTPIA CET 2018 Counselling

BPTPIA CET 2018 Counselling will be done completely on the basis of marks obtained by candidate in written exam. Subsequent to declaration of result, candidates will receive intimation regarding appearing for the counselling process.

  • Certain participating colleges also assign weightage to group discussion and interview that take place during counselling
  • Counselling process of each participating institute is different
  • Candidate must read about counselling instructions of the institute they are going to beforehand
  • Candidate is required to carry original copies of following documents for the purpose of verification-
  • All educational mark sheets
  • Certificates
  • Testimonials
  • Candidate’s admission can be cancelled in case of discrepancy in documents or failure to meet rules and regulations specified by BPTPIA.
  • All the applicants must report on allotted date and time with all documents and submit fee. Failure to do so can cause cancellation of admission and seat being allotted to some other candidate

List of Colleges Participating in BPTPIA CET 2018

Candidates can check below the colleges taking part in BPTPIA CET 2018. There are total 16 private colleges offering admission to B.Tech program while 26 colleges are offering admission to Diploma (Polytechnic) courses.

B.Tech. CollegesPolytechnic Colleges
R.P.Sharma Institute of Technology, PatnaBuddha Institute of Technology
Budha institute of technology, GAYABuddha Polytechnic Institute
Millia Institute of Technology, PurneaMillia Polytechnic
vidya vihar Institute of Technology, purneaPatna Sahib Technical Campus
Patna Sahib College of Engg. & TechnicalC R K Polytechnic
Sityog Institute of Technology, AurangabadSityog Institute of Technology, Aurangabad
Azmet institute Of Technology, KishanganjSandip Foundations, Shri Ram Polytechnic
K.K.College of Engineering & Management, NalandaAzmet College of Engineering & Tech.
Netaji Subhash Institute of Technology, Bihta, PatnaK.K. Polytechnic
Siwan Engineering & TechnologyK.K. College of Engineering & Management
Maulana Azad College of Engineering & Tech.Ganga Memorial College Of Polytechnic
Millia Kishanganj College of Engineering and TechnologyNetaji Subhas Institute of Technology
VidyaDaan Institute Of Technology & ManagementR.P.Sharma Institute of Technology
Adwaita Mission institute Of TechnologyPrabhu Kailash Polytechnic
Moti Babu Institute of Technology(MBIT)Millia Polytechnic
--Millia Institute of Technology, Purnea
--Azmet Institute of Technology
--Netaji Subhas Institute of Polytechnic, AMHARA
--Satyam International Institute of Technology
--J.P Institute of Technology
--GEMS Polytechnic College
--Girija Devi Polytechnic College
--Jamui Polytechnic
--Buddha Polytechnic
--Hi-Tech Polytechnic

GET MORE INFO

Fee Structure

  • 100

    general

Comments

Comments


No Comments To Show

×